Liam Steel, located in Manila, Philippines, has built a solid reputation as a reliable manufacturer and supplier of top-notch Carbon Steel EN-1A Bars, celebrated for their precision and dependability. With a focus on producing bars that adhere to international quality standards, Liam Steel guarantees outstanding mechanical performance, durability, and consistency. These EN-1A Bars are designed to deliver impressive strength, machinability, and toughness, making them perfect for demanding industrial applications. Catering to industries like automotive, construction, and machinery manufacturing, Liam Steel is dedicated to providing high-performance carbon steel products, along with prompt service and exceptional customer support, solidifying its role as a trusted partner in the steel sector.
Carbon Steel EN-1A Bars are low-carbon steel bars typically composed of 0.18–0.23% carbon, 0.35–0.65% manganese, and trace amounts of phosphorus and sulfur. This specific composition ensures good machinability, moderate strength, and ductility. With a tensile strength of around 400–500 MPa and a yield strength of approximately 250–300 MPa, these bars are well-suited for components that require shaping and machining without sacrificing toughness. Their mechanical properties enable reliable performance in applications that demand precision, uniformity, and moderate wear resistance under standard operating conditions.
| Grade | en1a |
|---|---|
| Specification | BS970: 1955 EN1A, BS970/PD970: 1970 onwards 230M07. |
| Round bar size | Diameter: 3-~800mm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Square bar size | 4 to 100mm |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Section | 3.0 to 12.0mm thickness |
| Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Billet Size | 1/2″ to 495mm Diameter |
| Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Finish | Cold (bright) drawn, centreless ground,smooth turned, peeled, slit rolled edge, hot rolled, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Condition | Hardened & tempered, annealed |
| Technique | en1a Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Processing | Bar cutting to 650mm |
| Form | en1a Welding Rod, Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
230M07 (EN1A) Specification Chemical composition | |
|---|---|
Carbon | 0.15% max |
Silicon | 0.40% max |
Manganese | 0.90-1.30% |
Sulphur | 0.25-0.35% |
Phosphorus | 0.070 Max |
Chromium | – |
Molybdenum | – |
Nickel | – |
Lead | 0.15-0.35% (Where specified) |
230M07 (EN1A) – mechanical properties in cold drawn condition | ||
|---|---|---|
Max Stress | 370-480 n/mm2Â Min | dependent on ruling section |
Yield Stress | 240-400 n/mm2Â Min | dependent on ruling section |
0.2% Proof Stress | 225-360 n/mm2Â Min | dependent on ruling section |
Elongation | 6-10% Min | dependent on ruling section |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
10 mm | 3, 5 mm |
12 mm | 3, 5, 6 mm |
13 mm | 3 mm |
16 mm | 3 mm |
20 mm | 3, 5, 6, 8, 10, 12 |
25 mm | 3, 5, 6, 8, 10, 12, 16, 20 |
30 mm | 3, 5, 6, 8, 10, 12, 16, 20, 25 |
40 mm | 3, 5, 6, 8, 10, 12, 16, 20, 25, 30 |
50 mm | 3, 5, 6, 8, 10, 12, 16, 20, 25, 30 |
60 mm | 3, 6, 8, 10, 12, 16, 20, 25, 30 |
70 mm | 3, 5, 6, 8, 10, 12, 16, 20, 25 |
80 mm | 5, 6, 8, 10, 12, 16, 20, 25 |
90 mm | 6, 10, 12, 16 |
100 mm | 3, 5, 6, 8, 10, 12, 16, 20, 25, 30, 40, 50 |
125 mm | 10, 25, 50 |
150 mm | 6, 10, 12, 16, 20, 25, 30, 40, 50 |
200 mm | 10, 12, 20, 25, 30, 50 |
These Carbon Steel EN-1A Bars find extensive use in industries where machinability and moderate strength are crucial. They are often utilized in the production of machine parts, bolts, shafts, spindles, pins, and other components that need precise machining and finishing. Moreover, they are ideal for automotive parts, light engineering structures, and general fabrication projects. The combination of excellent mechanical properties and workability makes EN-1A Bars a go-to choice for applications where components must withstand regular operational stress while ensuring dimensional accuracy and dependable performance in various industrial settings.
Liam Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Manila, Philippines.
Copyright 2025 Liam Steel. All rights reserved
